To Connect to WØAK in Des Moines from
       the Ames area using 2m at 1200 baud:

     1)  Connect to the CY side of the node system
           on 144.930 MHz at 1200 baud

         c cy

     2)  Connect to the CY9 side of the node system

         c cy9

     3)  Digipeat to WØAK through WAØJFS

         c wØak v waØjfs-2
          --- OR ---
         c wØak v waØjfs-3, 515222
 

     To Connect to WØAK in Des Moines from
       the Ames area using 70cm at 9600 baud:

     1)  Set up your transceiver as if it were to be used
           to talk through a repeater.  Set your receive
           frequency to 441.125 MHz and use a +5 MHz
           offset for the transmit side (446.125 MHz)

     2)  Digipeat to WØAK through WAØJFS

         c wØak v waØjfs-2
          --- OR ---
         c wØak v waØjfs-3, 515222